IPP BRAND PRODUCTS

Trade Name: POLY-FOAM COMP. “A”

Chemical Family: AROMATIC ISOCYANATES

Formula: Mixture

Manufacturer: BASF CANADA, 100 Milverton Drive, Mississauga, ON L5R 4H1
Emergency Phone #’s:(800) 454-2673

Supplier: Industrial Plastics (1975) Ltd, 776 Cloverdale Ave., Victoria, BC V8X 2S7
Tel.# (800)667-1757


Transportation EMG. Phone # CANUTEC (613) 996-6666 (604) 930-0650


HAZARDOUS INGREDIENTS:
Diphenymathane-4,4’-diisocyanate(MDI): >=30.0 - <=60.0% CAS # 101-68-8
Methylenediphenyl diisocyanate: >=6.0 - <=10% CAS # 26447-40-5
P_MDI: >=30.0 - <=60.0% CAS # 9016-87-9


Exposure Limits: ACGH 0.005ppm TWA
OSHA CLV 0.02 ppm 0.2 mg/m3
Oral: LD50/rat: > 10,000 mg/kg – Practically nontoxic
Inhalation: LC50/rat: > 2.240 mg/l / 1 h – Moderately toxic

PHYSICAL DATA:
Appearance & Odour: Amber to brown liquid, faint odour, aromatic
Odour Threshold: No data
Vapour Pressure: 0.00001 mm/HG @ 20ºC
Vapour Density: No data
Solubility in Water: Reacts
Density: 1.22 cm3 g/
Boiling/Condensation Point: 200oC
Bulk Density: 10.16 US lb/gal
Freezing Point: 3ºC

FIRE & EXPLOSION DATA:
Flashpoint & Method: 220oC (COC)
Flammable Limits: UFL & LFL - N/A

Extinguishing Methods: Water, dry extinguishing media, carbon dioxide, foamSpecial Equipment & Procedures: Do not direct solid water stream or foam into hot burning pools. This may cause frothing and increase fire intensity. Use self-contained breathing apparatus & complete protective clothing.


REACTIVITY DATA:
Conditions Contributing to Instability: Avoid moisture
Incompatible Substances: Water, acid, alcohols, amines and alkalis. On contact with water, gaseous decomposition products are formed, which cause build-up of pressure in tightly closed containers. Risk of bursting. Reacts with substances which contain active hydrogen 
Hazardous Decomposition Products: Carbon monoxide, hydrogen cyanide, nitrogen oxides, aromatic isocyanates, gases/vapours.
Hazardous Polymerization: Polymerization may occur with incomplete reactants. Especially strong bases, water or temperatures over 190°C. Temperatures over 48°C accelerate the reaction with water.


HEALTH HAZARDS DATA:
NOTE: Health studies have shown that exposure to chemicals pose potential risks which may vary from person to person. Exposure to liquids, vapours, mists or fumes should be minimized

PRINCIPAL HEALTH HAZARDS:
Skin Contact: Contact may cause dry skin, irritate skin or dermatitis
Eye Contact: Irritation and corneal injury
Ingestion: May cause gastrointestinal disturbances, pain & discomfort.
Inhalation: May cause irritation of the respiratory tract, narcosis, tightness of chest, difficulty breathing and possible lung damage.


FIRST AID PROCEDURES:
Skin: Wash with soap & water. Seek medical attention if irritation persists.
Eyes: Flush with flowing water for 15 minutes occasionally lifting eyelids. Obtain medical attention immediately.
Ingestion: DO NOT INDUCE VOMITING. Rinse mouth and then drink plenty of water. Never induce vomiting or give anything by mouth if the victim is unconscious or having convulsions. Immediate medical attention required.
Inhalation: Remove to fresh air, give oxygen or artificial respiration as required, seek medical attention.

PREVENTIVE MEASURES:
Skin: Always apply appropriate barrier cream to exposed skin. Wear impervious gloves (butyl rubber), coveralls and safety footwear.
Eyes: Chemical proof goggles or full face respirator if vapours cause eye irritation.
Ingestion: Wash thoroughly before consuming food stuffs.
Inhalation: Use only in well ventilated areas or use NIOSH or CAS approved respiratory protection with organic vapour cartridges.


CONTROL MEASURES & PRECAUTIONS
Keep container tightly closed. Do not consume food, drink or tobacco in work area or material storage areas.
Use caution and personal cleanliness to avoid skin and eye contact. Avoid breathing vapours of heated materials.
Use paper covering absorbent wipes and suitable disposable containers in work area.

SPILL, LEAK & DISPOSAL METHODS
Review fire and explosion hazards and safety precautions before proceeding with clean up. Restrict access to area. Contain spill to prevent liquid from entering sewers or waterways. Recover free liquid and use an absorbent material (i.e. sand, vermiculite) to soak up balance. Place in suitable container for disposal.

DISPOSAL METHOD
Dispose only in a facility permitted to dispose of hazardous waste by Federal, Provincial and Municipal regulations.

SHIPPING INFORMATION
Shipping Name: N/A
Hazard Class: N/A
UN/PIN #: N/A
Flashpoint: 204oC
WHMIS: D2A, D2B

The information contained herein is based on data that we believe to be accurate. No warranty either expressed or implied is made. This information is offered solely for your consideration interpretation and information.

Preparation Date: February 23, 1993
Prepared by: Ron Sherring, 776 Cloverdale Ave., Victoria, BC
Telephone #: (800) 667-1757
Revised Date: June 3, 2017


N/A = Not Available