MATERIAL SAFETY DATA SHEET
Trade Name: PROFIL (GLASS BUBBLES)
Chemical Family: Amorphous Mineral Silicates
Manufacturer: SILBRICO CORP.
6300 River Road Hodgkins,
Illinois U.S.A. 60525
Emergency Phone #'s: (312) 735-3322
Supplier: INDUSTRIAL PLASTICS (1975) LTD
776 Cloverdale Ave.,
VICTORIA, BC. V8X 2S7
Transportation EMG.Phone #'s: CANUTEC (613) 996-6666
None CAS # 93763-70-3
Exposure Limits: N/A
Appearance & odour: white powder, no odour
Odour Threshold: N/A
Specific Gravity: (H2O=1) 2.35
Vapour Density: N/A
Solubility in water: Negligible
Vapour Pressure: N/A
FIRE AND EXPLOSION DATA
Flashpoint & Method: N/A does not burn
Flammable Limits: N/A
Extinguishing Media: No restrictions
Special equip. and procedures: Self contained breathing apparatus and protective
clothing. Keep dust to a minimum.
Conditions contributing to instability: none
Incompatible Substances: none - material is inert
Hazardous decomposition: none
Hazardous Polymerization: will not occur
HEALTH HAZARDS DATA
NOTE: Health studies have shown that exposure to chemicals pose potential risks which may vary from person to person. Exposure to liquids, vapours, mists or fumes should be minimized.
PRINCIPAL HEALTH HAZARDS
Skin Contact: contact may cause dry skin, irritate skin or dermatitis
Eye Contact: irritation
Inhalation: may cause irritation of the respiratory tract
FIRST AID PROCEDURES
Skin: wash with soap and water, seek medical attention if irritation persists
Eyes: flush with flowing water for 15 minutes. If irritation persists obtain medical attention.
Inhalation: remove to fresh air, give oxygen or artificial respiration as required, seek medical attention.
Skin: Always apply appropriate barrier cream to exposed skin. Wear impervious gloves (butyl rubber) coveralls, and safety foot wear.
Eyes: Chemical proof goggles or full face respirator if dust cause eye discomfort.
Ingestion: Wash thoroughly before consuming food stuffs.
Inhalation: Use only in well ventilated areas or use NIOSH or CSA approved respiratory protection with organic vapour cartridges.
CONTROL MEASURES & PRECAUTIONS
Keep container tightly closed. DO NOT consume food, drink or tobacco in work or material storage areas. Use caution and personal cleanliness to avoid skin and eye contact. Avoid breathing dust of this material. Use suitable disposal containers in work area.
SPILL, LEAK & DISPOSAL METHODS
Take steps to minimize spillage . Sweep up and deposit into a suitable container.
Disposal Method: Dispose of in a facility permitted to dispose of waste by Federal, Provincial and Municipal regulations.
The information contained herein is based on data that we believe to be accurate. No warranty either expressed or implied is made. This information is offered solely for your consideration, interpretation and information.
Preparation Date: Mar 28 1996
Prepared By: Ron Sherring, Industrial Plastics (1975) Ltd
Revised Date: June 3, 2017