IPP BRAND PRODUCTS

MATERIAL SAFETY DATA SHEET

Trade Name: P.V.A. MOULD RELEASE
Chemical Family: Alcohol
Formula: Mixture

Manufacturer:
REXCO
P.O. Box 80996 Conyers, GA USA 30094
Emergency Phone #’s: 1-800-888-1060

Transportation EMG. Phone # CANUTEC (613) 996-6666

Supplier: 
Industrial Plastics & Paints
776 Cloverdale Ave
Victoria, BC V8X 2S7
Phone 250-727-3545

HAZARDOUS INGREDIENTS:

Water: 56 – 61% CAS # 7732-18-5
Ethyl Alcohol: 31 - 34 % CAS # 64-17-15
Aceticc Acid Ethenyl Ester, Polymer 
with Eethenol: 
7 – 8% CAS # 25213-24-5
Butyl Alcohol 1 - 2 % CAS # 71-36-3
Exposure Limits:
LD50 ingestion rat 7606 mg/kg
LC50 Inhl. rat 20000 ppm / 10 hrs

PHYSICAL DATA:
Appearance & Odour: watery green liquid, alcoholic odour
Odour Threshold: N/A
Vapour Pressure: 26.67 mm/HG
Vapour Density: (air = 1) 1.2
Solubility in Water: complete
Specific Gravity: (H2O = 1) 0.95
Boiling Point: 70 - 104EC

FIRE & EXPLOSION DATA:
Flashpoint & Method: 24oC (TC) Auto ignition Temperature: 354EC
Flammable Limits: LFL 3.3%, UFL 18.7%
Extinguishing Methods: CO2, dry chemical, water fog, water spray or alcohol resistant foam.
Special Equipment & Procedures: Self-contained breathing apparatus & complete protective clothing. Water may be unsuitable as an extinguishing media but helpful in keeping the adjacent containers cool in order to prevent container rupture. Avoid spreading burning liquid with water used for cooling purposes.

REACTIVITY DATA:
Conditions Contribu
ing to Instability: 
Heat, sparks and open flame
Incompatible Substances: Strong oxidizing agents, acids, alkalies and bases
Hazardous Decomposition Products: CO, CO2, H2O
Hazardous Polymerization: Will not occur.

HEALTH HAZARDS DATA:
NOTE: Health studies have shown that exposure to chemicals pose potential risks which may vary from person to person. Exposure to liquids, vapours, mists or fumes should be minimized. 

PRINCIPAL HEALTH HAZARDS:
Skin Contact: Contact may cause dry skin, irritate skin or dermatitis
Eye Contact: Can cause eye irritation. Prolonged or repeated exposure may result in conjunctiva.
Ingestion: May cause nausea, vomiting, gastrointestinal bleeding, abdominal pain, and central nervous system depression with symptoms ranging from drunkenness to unconsciousness, narcosis,coma, respiratory failure, and death, depending on the quantity ingested.
Inhalation: Repeated or prolonged exposure may cause central nervous system depression, including headache, dizziness, loss of coordination, unconsciousness.

FIRST AID PROCEDURES:
Skin: Remove contaminated clothing and launder before reuse. Wash with soap & water. Seek medical attention if irritation persists.
Eyes: Flush immediately with cold water for 15 minutes and seek medical attention.
Ingestion: Seek immediate medical attention. Only induce vomiting if directed to do so by medical personnel. If vomiting occurs, keep victims head below hips to prevent aspiration into lungs. If possible do not leave victim unattended.
Inhalation: Remove to fresh air, give oxygen or artificial respiration as required, seek medical attention.

PREVENTIVE MEASURES:
Skin: Always apply appropriate barrier cream to exposed skin. Wear impervious gloves (butyl rubber), coveralls and safety footwear.
Eyes: Chemical proof goggles or full face respirator if vapours cause eye irritation.
Ingestion: Wash thoroughly before consuming food stuffs.
Inhalation: Use only in well ventilated areas or use NIOSHor CAS approved respiratory protection with organic vapour cartridges.

CONTROL MEASURES & PRECAUTIONS
Keep container tightly closed. Do not consume food, drink or tobacco in work area or material storage areas. Use caution and personal cleanliness to avoid skin and eye contact. Avoid breathing vapours of heated materials. Use paper covering absorbent wipes and suitable disposable containers in work area.

SPILL, LEAK & DISPOSAL METHODS
Review fire and explosion hazards and safety precautions before proceeding with clean up. 
Restrict access to area. Contain spill to prevent liquid from entering sewers or waterways. Recover free liquid and use an absorbent material (i.e. sand, vermiculite) to soak up balance. Place in suitable container for disposal.

DISPOSAL METHOD
Dispose only in a facility permitted to dispose of hazardous waste by Federal, Provincial and Municipalregulations.

SHIPPING INFORMATION
Shipping Name: Alcohol N.O.S. (Ethyl Alcohol Mix)
Hazard Class: 3
UN/PIN #: 1987 III
Flashpoint: 24oC
WHMIS: N/A

The information contained herein is based on data that we believe to be accurate. No warranty either expressed or implied is made. This information is offered solely for your consideration interpretation and information.

Preparation Date: September 1, 2000
Prepared by: Ron Sherring,
Telephone #: (250) 727-3545
Revised Date: June 3, 2017
N/A = Not Available