Pour-N-Restore Oil Stain Remover lifts and absorbs embedded oil stains as it dries from a liquid to a powder. This is made possible by combining a powerful citrus degreaser with a non-leaching absorbent. To restore concrete and masonry, just apply Pour-N-Restore Oil Stain Remover, let it dry from a liquid to a powder, and sweep it up. No scrubbing. No rinsing. No mess.
Pour-N-Restore Oil Stain Remover is superior to conventional degreasers because it combines a powerful citrus degreaser with a non-leaching absorbent to create Micro-Extraction Technology
When conventional degreasers are applied, they soak deep into concrete and masonry, but only the surface gets scrubbed and rinsed off. After rinsing, the degreaser that has soaked in begins to evaporate out, and this draws the stain back up to the surface again.
Pour-N-Restore also soaks deep into concrete and masonry, but the Micro-Extraction Technology allows it to lock onto oil molecules and extract the entire stain to the surface where it is absorbed. And because Pour-N-Restore is not swept up until it has completely dried from a liquid to a powder, it effectively absorbs the entire stain as the citrus degreaser evaporates and draws it out.
Since Pour-N-Restore is so effective, it is ideal not only for aesthetic reasons, but also as a preparation before applying sealers, epoxy paint, or other coatings. Oil residue can cause coatings to release, but Pour-N-Restore Oil Stain Remover helps to ensure proper adhesion.