Cold Cure may be used effectively down to 35ºF/2ºC in 100% relative humidity. It is an easy to use 2:1 ratio. It will not blush or turn milky in thin films and cures overnight. Cold Cure is a 100% solids, unfilled, medium modulus, low viscosity, moisture tolerant epoxy system. Cold Cure has no VOCs. It is non-shrinking, flexible and has excellent resistance to cracking, abrasion, common chemicals and fatigue. Cold Cure is clear and is compatible with most paints and clear finishes. When cured it can be machined, drilled, sanded and tapped. It is a corrosion resistant coating, sealer and laminating resin.
Recommended Uses: Cold Cure bonds to wood, concrete, steel and fiberglass. Use Cold Cure as a corrosion resistant coating for steel and concrete. Use Cold Cure as a sealer for concrete (garage floors or foundations), fiber-reinforced polyester (boat hulls & pultruded glass), lumber (all outdoor end grains; compatible with pressure treated wood). Use Cold Cure as a laminating resin for plywood (sheathing with fiberglass cloth for boats or decks), veneer (cold molding), and fiberglass (making composites).
(Each kit contains 2-parts resin and 1-part hardener)
1-1/2 pint kit
1-1/2 quart kit
3 quart kit
1-1/2 gallon kit
3 gallon kit
Larger sizes available by special order
Hardener Sizes Over 1 Litre Require Dangerous Goods Shipping