S-1 Sealer
Penetrating epoxy sealer
- Description
- Sizes
- MSDS
- Special Shipping
- Colours
- Tech Data
S-1 Sealer is a two-part clear penetrating epoxy sealer (C.P.E.S.). Intended for marine use, it will act as a waterproof and chemical resistant primer on a variety of substrates including wood, concrete, metal, and fiberglass.
Product Features:
- Simple 1:1 mix ratio
- Ready-to-use viscosity, no thinning required
- Excellent wetting properties on most surfaces
- Applies by brush, roller, or spray
- Long pot life
- Waterproof
- Strong adhesion to most substrates with minimal surface preparation
- Non-brittle even at extremely low temperatures
- No sanding required between coats up to 24 hours
- Resistant to salt air & water, mild acids, alkalis, chemicals, and solvents (not unleaded gasoline-proof)
- Clear, but may be pigmented
Recommended Uses:
Wood: Seals effectively against moisture and oxygen, helping to protect against wood rot. Ideal for yacht interiors, shelving, cabinets, and furniture.
Ferro-cement boats (reinforced concrete): Excellent moisture barrier for bulkheads and decks.
Metals: Helps to prevent oxidation and chemical exposure effects including staining and tarnish.
FRP (fiberglass): Coat polyester laminates with S-1 to provide complete moisture resistance that the fiberglass laminate alone can't provide. Use as a first sealer step in gel coat blister repair, after the blisters have been ground out.
Package Sizes:
(Each kit contains 1-part resin and 1-part hardener)
2 quart kit (F1400K20)
2 gallon kit (F1400K50)
10 gallon kit (F1400K60)
DANGEROUS GOODS
Product Requires Dangerous Goods Shipping
Clear